Stacking Standoff Kit for Raspberry Pi HATS
Use these standoffs as the end part of a stack of Raspberry Pi HATs or Blankets. Note that these are slightly longer than the headers you need at the bottom of the stack. They are 12mm as opposed to 11mm and is what is needed when using the recommended Raspberry Pi HAT connector system.
- 4 x 12mm Female to Female Hex Spacer
- 4 x 2.5 x 6mm screws
NOTE Note: This should NOT be used as the base of the stack. For the base use the 11 mm Stacking Kit. If you want to stack further HATs / Blankets use the Male - Female 12mm standoffs instead.
There are no reviews yet.